Steps to a Successful Set-Up

1. Select a dry, flat area, making sure it is large enough to accommodate the entire unit, as well as an additional 5' clearance on all four sides of the unit.
2. Make sure the location you select is near an electrical outlet.  If no outlet is available you will need a generator.
3. Make sure the location is away from tree branches, bushes, food & beverage tables, power lines and pets.
4. Clear the ground of any debris that may damage the bottom of the unit; sticks, rocks, pinecones, animal droppings, trash and anthills. When setting up on grassy areas, it is recommended that a tarp be placed under the unit.  When setting up on asphalt/concrete, it is absolutely necessary that a tarp be used under the unit.
5. Using the attached anchor rings and ground stakes that are provided with each unit, securely stake down the sides and corners, similar to that of your typical tent.  When setting up on asphalt/concrete, sandbags should be used in place of ground steaks.
6. Make sure all electrical plugs are secure in their outlets prior to inflating the unit.
7. Once the unit is completely inflated, check to make sure there are no sagging/collapsing pillars or beams and that all sections of the bounce surface are securely inflated.
8. Enjoy!